Construction Materials & Coatings Industry
If you have any product questions or need to request an MSDS, Please click here to contact us.

AC-940

A water-based, non-hazardous temporary protective coating designed for use on fiberglass, acrylic, stainless steel and most other non-porous surfaces.   AC 940 was designed to eliminate unnecessary repairs and clean up after shipping, storage, fabrication and installation.  When used as directed, AC 940 will protect surfaces for up to six months (even in direct sunlight). Peels off easily leaving a clean, preserved surface. See epmar.com for more information.

AC-9100

AC-9100 is a water based, air curing, hand peelable, temporary protective coating intended for use as a protective film on window glass and/or metal frames to minimize surface damage during shipping, construction, painting, and rehab. See epmar.com for more information.

BRIGHT WHITE BOOTH COATING

Water based Bright White Booth Coating is a white, hand peelable, protective coating for use in paint spray booths. See epmar.com for more information.

FLEXIBLE SEAL^™

A long lasting primerless, paintable, Kraton G^® block copolymer based, elastomeric sealant. When used as directed, the material will seal joints or cracks to resist the passage of light, heat, cold, air, snow, wind, odor, dust and chemical contaminants. Material has a 30 year life expectancy.Highly recommended for commercial or residential buildings and their roofs, walls, and window openings. The product adheres to brick, glass, wood, copper, concrete, fiberglass, steel, aluminum, and most plastics, in wet or dry conditions. See epmar.com for more information.

The elastomeric characteristic allows the sealant to expand and contract in the heat of the mid day to the coolness of night.

RAPID ARMOUR^®

Thick temporary protective coating that is hand peelable, UV resistant, VOC-free, chemical resistant and water resistant. It can be applied to various surfaces such as acrylic, fiberglass, porcelain, stainless steel and most non-porous surfaces. Cures in seconds. See epmar.com for more information.

R18-41A

R18-41A is a water based, air or forced dry, hand peelable, U.V. resistant, temporary protective coating. When applied to most non-porous surfaces (glass, porcelain, fiberglass, gel coat, aluminum and stainless steel), the coating provides protection from abuse. See epmar.com for more information.

RAPIDSHIELD^™

100% solids, ultraviolet (UV) curable coating for concrete floors with outstanding gloss and durability. Used to protect industrial concrete floors in factories, warehouses and commercial institutions and also to mark aisles, walkways and transition areas. Additional information.

SIGN MASK

Sign Mask is a water based, air or forced dry, hand peelable, UV resistant, tan colored, semi-transparent, temporary protective coating that can be applied to most non-porous surfaces. See epmar.com for more information.

SS1500

Abrasion resistant, 100% solids, 0-VOC epoxy coating that has been especially formulated to coat marine show aquaria.  Self priming, excellent adhesion and cures to a resilient porcelain-like high gloss finish. Applied to concrete, fiberglass & steel surfaces that are subject to continuous abrasion, chlorine & salt water immersion, theme parks, commercial and show aquariums, fountains & water slides. See epmar.com for more information.

STA CRETE^®

STA-NATURAL

A 0-VOC, extremely user-friendly, waterborne silane/siloxane emulsion for sealing Kemiko Stone Tone Stained concrete and other cementitious substrates.
See epmar.com for more information.

TCP STRIPPER

AC Products' TPC Stripper may be used to help remove temporary protective coatings that have been applied incorrectly or are otherwise no longer peelable. See epmar.com for more information.