Decorative Concrete

Kemiko^® Neutra Clean

An industrial strength, high performance water base sodium metasilicate cleaner for the preparation of bare concrete for staining, sealing, and recoating. It is a water viscosity, single component product with a pleasant citrus odor that does not contain any hazardous solvents and is highly recommended as a product to neutralize the residue and clean the concrete surface after staining. See epmar.com for more information.

Kemiko^® Stone Tone Acid Stain

Decorative, low maintenance acid stain with 0-VOC. Forms permanent colors on concrete. Can be applied either to interior or exterior concrete. Exterior vertical and horizontal application is possible, such as, concrete walls of buildings, retaining walls, sound barriers, driveways, and patios. Interior applications include concrete floors and counter tops in kitchens, living, dining and recreation areas, as well as, commercial applications such as hallways, walkways, stadiums, casinos, rockwork, and statuary. Available in eight colors. See epmar.com for more information.

Rembrandt

Ultra-low VOC, acrylic polymer stain. Excellent adhesive strength and wear qualities. A full palette of pigments that allow the applicator to decorate concrete with an unlimited variation of artful colors. Applied to walkways, decks, commercial and residential floors, hospitals, schools, malls, restaurants, interior or exterior concrete, plaster, polymer cement, as well as, applications to wood as a stain, wash, or faux finish. See epmar.com for more information.

RapidShield^™

100% solids, ultraviolet (UV) curable coating for concrete floors with outstanding gloss and durability. Used to protect industrial concrete floors in factories, warehouses and commercial institutions and also to mark aisles, walkways and transition areas. See rapidshield.com for more information.

Kemiko^® Stone Tone Sealer II

Kemiko^® Epoxy Clear Sealer

Recommended for commercial interior applications, this is a very high performance two component water extended epoxy coating that offers excellent physical properties, a long pot life, low VOC, water clean up, low odor and is designed to be used as a thin film finishing coat for stained concrete floors. See epmar.com for more information.

Kemiko^® Poly Clear Sealer

Recommended for commercial exterior applications, this is a very high performance two component waterborne high solids aliphatic polyurethane coating that offers 0 VOC, UV resistance, good chemical resistance, excellent abrasion resistance that cures to a very durable film. See epmar.com for more information.

Kemiko^® Sta Natural

A single component 0-VOC waterborne siloxane emulsion used to improve the water resistance of Kemiko stained concrete. It is an extremely user friendly product that repels water, reduces efflorescence and frost damage while allowing the substrate to breath. See epmar.com for more information.

Kemiko^®Stone Tone Wax

This is a specially formulated buff on wax for concrete that produces a low sheen finish with very high protection and durability. Designed for interior use over Kemiko Stone Tone Stain, colored concrete, tile, brick, or any masonry surface. See epmar.com for more information.

Kemiko^® Easy Shine Wax

A low-VOC, extremely user friendly, waterborne acrylic polymer, mop on wax for protecting and maintaining sealed concrete and many other finished substrates. Easy Shine repels water, reduces scuffing and marring, allows substrate to breathe, is low odor, and produces a deep rich shine. See epmar.com for more information.

Kemiko^® Easy Strip

A high performance water base, concentrated wax stripper designed for easy removal of Kemiko Stone Tone and Easy Shine waxes.  Does not contain hazardous solvents.  Is biodegradable. See epmar.com for more information.