
OVER 25% IN MAINTENANCE COST SAVINGS
QUAKERTEK™ CS 2202-EP is a high performance
calcium sulfonate complex grease based on mineral
oil and can be used in application operating under
severe conditions with regard to medium to high
speeds, high loads, and corrosion challenges in a
wide range of industries.

Reduced Drying Time with Water Based Coating Replacement
QUAKERCOAT® 856 GREEN provides uniform coverage during application and excellent durability and performance.

Underground Coal Mine Mitigates The Risk Of Fire By Using Fire-Resistant Hydraulic Fluid
To mitigate the risks of using a mineral oil based hydraulic fluid a large underground coal mine in southern West Virginia was using QUINTOLUBRIC® 888-68 an MSHA approved fire-resistant hydraulic fluid in their hydraulic systems.
To mitigate the risks of using a mineral oil based hydraulic fluid a large underground coal mine in southern West Virginia was using QUINTOLUBRIC® 888-68 an MSHA approved fire-resistant hydraulic fluid in their hydraulic systems.
Underground Coal Mine Mitigates The Risk Of Fire By Using Fire-Resistant Hydraulic Fluid
To mitigate the risks of using a mineral oil based hydraulic fluid a large underground coal mine in southern West Virginia was using QUINTOLUBRIC® 888-68 an MSHA approved fire-resistant hydraulic fluid in their hydraulic systems.

$500,000 Savings via Longwall Fluid Conversion
Introducing QUINTOLUBRIC 818-02 full synthetic Longwall Fluid to a longwall mine fixed sediment issues, and enabled the mine to reduce fluid consumption, lower filter usage, and improve the pump station and solenoid valve performance, resulting in $500,000 cost savings.
Introducing QUINTOLUBRIC 818-02 full synthetic Longwall Fluid to a longwall mine fixed sediment issues, and enabled the mine to reduce fluid consumption, lower filter usage, and improve the pump station and solenoid valve performance, resulting in $500,000 cost savings.
$500,000 Savings via Longwall Fluid Conversion
Introducing QUINTOLUBRIC 818-02 full synthetic Longwall Fluid to a longwall mine fixed sediment issues, and enabled the mine to reduce fluid consumption, lower filter usage, and improve the pump station and solenoid valve performance, resulting in $500,000 cost savings.

40% REDUCTION IN NEAT OIL CONSUMPTION
A world-leading automotive manufacturer was looking to replace the mineral oil based neat oil they were using for connector rod deep hole drilling
A world-leading automotive manufacturer was looking to replace the mineral oil based neat oil they were using for connector rod deep hole drilling
40% REDUCTION IN NEAT OIL CONSUMPTION
A world-leading automotive manufacturer was looking to replace the mineral oil based neat oil they were using for connector rod deep hole drilling

Increasing Sump Life by 250%
QUENCH SLICK™ 624 is specially formulated to be non-foaming and microbiologically stable, extending bath life.

Increasing Plunger Tip Life by Up to 300%
PLUNGER SLICK® 400 will not clog the feed lines or valves, does not promote corrosion or pitting, and extends the tip and sleeve life.

Reduced Blistering and Spray Time
DIE SLICK® N450 exhibits excellent emulsion stability when diluted and forms a tough die film that resists soldering and promotes good metal flow.

Reducing Haul Road Dust When Water Is Scarce With Quaker Dustgrip® Super Tac
DUSTGRIP® SUPER TAC can reduce fine dust generated by large equipment operating on the untreated haul roads at a surface copper mine in a dry and low humidity environment where water is expensive and scarce.

Avoiding an Oil Fire Pool
When a steel producer had a fire incident in the Electric Arc Furnace process due to metal sparks igniting mineral oil that leaked and accumulated to form a pool they converted to QUINTOLUBRIC® 888-46 to minimize the risk of fire due to its increased auto ignition and heat of combustion compared to mineral oil.

70% Reduction in Grease Consumption
By converting to QUAKERTEK CS 4015-EP a roughing mill has achieved reduced maintenance time and cost, as well as cooling water pollution, and now has cleaner machinery.

Reducing Coolant, Water and Energy Consumption
By switching to Quaker’s 2PAQ™ technology: QUAKERCOOL® W-ALCA BFF & 7895 OIL, the customer was able to benefit from coolant and water consumption savings of up to 50% and a savings of up to 24% on energy consumption.

Reduced Dust And Asbestos Levels
DUSTGRIP® TURBO reduces dust and asbestos exposure to workers and the environment, as well as elimination of violations for the remainder of the construction company’s project

75% Decreased Clean Up Costs
Dedicated service and QUAKERCOAT® 547 coating resulted in an increased corrosion protection time, 10% coating cost reduction and decreased cleanup costs.

15% Reduced Fluid Consumption in Deep Hole Drilling
QUAKERCOOL® 3530 AFF is a formaldehyde releaserfree, water-dilutable semi-synthetic fluid with a medium mineral oil content, suitable for machining and grinding operations on most engineering materials, including sensitive aeronautical aluminum alloys.

35X Significant Oil Load Reduction with Less Defects
Load reductions (reduction in oil concentration),Reduction in roll peeling.Reduction in salt and pepper scale defects, Reduction in roll peeling on lubricated stands.

Captured $11 Million in Gross Savings in Increased Productivity and Quality
Fewer cold mill defects,Easy operator acceptance,Higher quality strip.

36% Concentration Reduction Machining Cast Aluminum Parts
QUAKERCOOL® 7450 is a high-performance, formaldehyde and boron free microemulsion ideally suited to all operations on aluminum and ferrous alloys demanding premium surface finish quality and consistent lubrication.

13% Tool Life Increase
FLEXICOOL™ TECHNOLOGY
QUAKERCOOL® 7350 BFF
FLEXICOOL™ TECHNOLOGY
QUAKERCOOL® 7350 BFF

Eliminating Dermititis and Odor Milling Cast Iron
QUAKERCOOL® 7330 BFF was introduced solving the customer’s skin irritation issues, eliminated the smelly odor, increased tool life X2, and top ups were decreased from 3% to 1.5%.

99% Rejected Engine Head Reduction
The use of FERROCOTE® 118 DC resulted in a 99% reduction of rejected engine heads, virtual elimination of the rust removal step, elimination of foam and bacterial growth, and a system life increase of 14%.

$50K Cost Savings Grinding Cams and Cranks
An automotive manufacturer converted to QUAKERCOOL® 740 and realized a cost savings of $50,000/year and reduced make-up rates by 2.5%.

Rapid Drying Cleaner
A diesel engine block manufacturer converted to QUAKERCLEAN® 680 VDA and experienced outstanding soil removal and excellent corrosion protection with uniform coating on the parts.