Select an industry filter below to browse through our
YOUR CHALLENGES. OUR SOLUTIONS.
88% SAVINGS VIA COOLANT MANAGEMENT
METAL REMOVAL FLUIDS
An aircraft engine manufacturer looking for significant waste reduction switched to QUAKERCOOL® 7205 and realized 88% annual savings in coolant spend, labor, and fluid treatment.
COST SAVINGS WITH 65% LESS DELAYS
QUINTOLUBRIC® 888-46 fire-resistant hydraulic fluid improved system efficiency with no lost coils and an overall cost savings of over $18k annually.
FIRE RESISTANT HYDRAULIC FLUIDS
UP TO 35% INCREASED TOOL LIFE IN PIPE THREADING
Incorporating QUAKERCOOL® 750 TP coolant increased tool life, decreased downtime, and achieved significant savings in cost per joint.
METAL REMOVAL FLUIDS
ELIMINATING IN-PROCESS CLEANING
By switching to FERROCOTE® 5856 BF T1, a bearings producer eliminated the process cleaning step saving $75,000/yr, reduced corrosion preventive cost by 20%, labor costs by 15%, and part rejections by 1.5%.
DUSTGRIP® SUPER TAC can reduce fine dust generated by large equipment operating on the untreated haul roads at a surface copper mine in a dry and low humidity environment where water is expensive and scarce.
When a steel producer had a fire incident in the Electric Arc Furnace process due to metal sparks igniting mineral oil that leaked and accumulated to form a pool they converted to QUINTOLUBRIC® 888-46 to minimize the risk of fire due to its increased auto ignition and heat of combustion compared to mineral oil.
By switching to Quaker’s 2PAQ™ technology: QUAKERCOOL® W-ALCA BFF & 7895 OIL, the customer was able to benefit from coolant and water consumption savings of up to 50% and a savings of up to 24% on energy consumption.
QUAKERCOOL® 3530 AFF is a formaldehyde releaserfree, water-dilutable semi-synthetic fluid with a medium mineral oil content, suitable for machining and grinding operations on most engineering materials, including sensitive aeronautical aluminum alloys.
QUAKERCOOL® 7450 is a high-performance, formaldehyde and boron free microemulsion ideally suited to all operations on aluminum and ferrous alloys demanding premium surface finish quality and consistent lubrication.
The use of FERROCOTE® 118 DC resulted in a 99% reduction of rejected engine heads, virtual elimination of the rust removal step, elimination of foam and bacterial growth, and a system life increase of 14%.
Adding DUSTGRIP® TURBO to a continuous miner reduced dust levels at an underground mining operation from 1.65 mg/m3 to .95 mg/m3. Also, DUSTGRIP® 007 reduced the amount of respirable dust generated on their roadways. Case Study. Quaker Chemical