Case Studies2018-10-17T17:14:56-04:00


QUAKERTEK™ CS 2202-EP is a high performance
calcium sulfonate complex grease based on mineral
oil and can be used in application operating under
severe conditions with regard to medium to high
speeds, high loads, and corrosion challenges in a
wide range of industries.


Reducing Haul Road Dust When Water Is Scarce With Quaker Dustgrip® Super Tac

DUSTGRIP® SUPER TAC can reduce fine dust generated by large equipment operating on the untreated haul roads at a surface copper mine in a dry and low humidity environment where water is expensive and scarce.


Avoiding an Oil Fire Pool

When a steel producer had a fire incident in the Electric Arc Furnace process due to metal sparks igniting mineral oil that leaked and accumulated to form a pool they converted to QUINTOLUBRIC® 888-46 to minimize the risk of fire due to its increased auto ignition and heat of combustion compared to mineral oil.


15% Reduced Fluid Consumption in Deep Hole Drilling

QUAKERCOOL® 3530 AFF is a formaldehyde releaserfree, water-dilutable semi-synthetic fluid with a medium mineral oil content, suitable for machining and grinding operations on most engineering materials, including sensitive aeronautical aluminum alloys.


36% Concentration Reduction Machining Cast Aluminum Parts

QUAKERCOOL® 7450 is a high-performance, formaldehyde and boron free microemulsion ideally suited to all operations on aluminum and ferrous alloys demanding premium surface finish quality and consistent lubrication.


13% Tool Life Increase

The use of QUAKERCOOL® 7350 BFF by a cycling component manufacturer increased tool life by 11-13%, reduced coolant cost by 21%, saved 6,000€/year , and chlorinated additives and foam were eliminated.

us flagfrance flag

99% Rejected Engine Head Reduction

The use of FERROCOTE® 118 DC resulted in a 99% reduction of rejected engine heads, virtual elimination of the rust removal step, elimination of foam and bacterial growth, and a system life increase of 14%.