Used in the
metalworking industries. Formulated to be readily removed through conventional
alkaline metal cleaningor
degreasing procedures. Specifically developed to
protect metal surfacesfrom
corrosionfor up to one year; can be applied using spray, dip, brush or electrostatic techniques.
Metal Rust PreventivesInterim, in-process and final
rust inhibitorsdesigned to
protect metal partsduring the manufacturing process and for medium to long-term indoor
storage of metal surfaces, both
non-ferrous. Proper selection and application of the fluid can result in substantial
cost benefits. Used in such processes
remove residual coolant fluidand grinding/honing debris from assembled
cast iron alloysand uncoated and
coated steel strip.
Edge SealersEdge sealers are formulated to be applied to the outer-lap of the
coiland to the
sidewalls. Edge sealers typically utilize volatile components and waxes to provide
barrier protectionto the coil. Subsequently, this barrier film offers protection from a variety of environmental contaminants, including
acid atmosphere. These types of products are generally considered very
robust rust preventivesbut often are more difficult to remove when compared to common
mill oils. Today, Quaker offers
Share this product line:
Mill Applied Lubricants
rust inhibitorthat also provides
enhanced lubrication propertiesas compared to
mill oils. Generally, prelubes will offer
better rust protection from humidity as compared to most mill oils and will clean easily too. These types of products contain additives that offer
increased hydrodynamic and
boundary lubrication. In some cases, these products also contain
extreme pressure additives for lubrication.
These products embody the overall value expected from a
slushing oil, including: excellent
stain resistance and removal from the surface. The aforementioned characteristics of a slushing oil are typically the formulating characteristics of all mill oils currently available. However, varying degrees of
humidity protection are available in mill oils and are commonly referred to as “enhanced” mill oils. These products offer the same performance characteristics of standard slushing oils, but exceed the overall humidity protection.
Vanishing oils are also formulated with volatile components, but contrary to
edge sealers, they are formulated to leave a very
low residual film on the surface. As a result, vanishing oils do not offer the same level of
humidity protection or
lubrication characteristics as compared to edge sealers, prelubes or slushing oils. However, the very low residual film does allow for
wet tempering and short to medium term protection while having very little impact on downstream processes. These oils offer
light duty stamping lubrication.
dry film technology, free of solvent or water carriers. Provides
excellent corrosionand industrial lubrication properties for ferrous and non-ferrous metals.
Applied electrostaticallyor by other conventional methods for use as a corrosion preventive, rust inhibitor or mill applied lubricant. Electrostatic application allows for in-house, in-line application.
QUAKER DRYCOTE® is a corrosion preventive dry film for
steel applications. It can offer
long-term indoor storagesolutions.
electrostatic methods, which will need
application oiler cabinet.
Share this product line:
- $3 Million Annual Savings by Eliminating Staining, Rejections, and Reworkguest author2017-11-21T14:16:40-04:00