SCAQMD COMPLIANT PRODUCTS 2017-11-10T21:59:56+00:00

SCAQMD COMPLIANT PRODUCTS

With the recent implementation of the South Coast Air Quality Management District’s new VOC (volatile organic content) test requirements, Quaker has taken the necessary steps to offer customers in the region compliant solutions. Quaker has modified products to meet the newly imposed VOC levels. We now offer two cutting oils, in our Machining & Grinding portfolio, that can be used without dilution, QUAKERCUT® 010 VES and QUAKERCUT®026 VPE. Each tailor made to perform in various machining, tapping, grinding and drilling operations. The products have been modified to maintain the excellent performance characteristics while maintaining VOC levels less than the 75 g/L requirement for this product application type.

Quaker’s new product development has also focused on offering corrosion preventives that meet the necessary maximum of 50 g/L, yet offer many of the physical characteristics and performance expectations of low viscosity, solvent type products that are now restricted for use. FERROCOTE® 26V LD and FERROCOTE® 30V MD have been developed to meet the needs of customers opting to use oil or synthetic base materials, as opposed to making the large step and process change to water based, or water dilutable products.

We are committed to offering a wide range of fully compliant products under SCAQMD Rule 1144 in 2012. Our goal is to develop, modify or identify existing products as needed to meet the performance and quality standards of customers affected by the new rule. Below is a list of our SCAQMD compliant products. For more information, please contact us.

PRODUCTCATEGORYSCAQMD
VOC LIMIT(g/L)
MAXIMUM
USE CONC
(v/v)
MAXIMUM
USE VOC
(g/L)
METALAPPLICATION
METAL REMOVAL
QUAKERCOOL® 7105Emulsifiable7512%19Ferrous
Non-Ferrous
Ni-Cr
Chlorinated, heavy-duty machining & grinding
QUAKERCOOL® 2776Synthetic7510%9High Alloy Steel
Carbon Steel
Cast Iron
Cast Aluminum
Wrought Aluminum
Heavy-duty machining & grinding, Light-duty machining & grinding
QUAKERCOOL® 2871Synthetic7510%26Uncoated Carbon SteelTube forming
QUAKERCOOL® 3474Semi-synthetic7510%9Cast Iron
Steel
General purpose machining & grinding
QUAKERCOOL® 3750Semi-synthetic7510%12Cast Iron
Steel
Heavy-duty machining & grinding
QUAKERCOOL®
6010 ND
Emulsifiable7515%1Non-Ferrous
Cast Iron
Difficult Steel
Multi-purpose machining & grinding
QUAKERCOOL®
7000 ALF BAF
Emulsifiable7512%13.3Aerospace Aluminum
Cast Iron
Steel
Turning, milling, grinding, honing & reaming
QUAKERAL® 370Emulsifiable7512%11Titanium
Aluminum
Steel
Heavy-duty machining & grinding, broaching, gun drilling, hobbing, mapal reaming
QUAKERAL® 372Emulsifiable7512%12Titanium
Aluminum
Steel
Cast Aluminum
Heavy-duty machining & grinding
QUAKERAL®
388 PW
Emulsifiable7512%17Cast Iron
Steel
Cast Aluminum
Heavy-duty machining & grinding
QUAKERAL®
481 V
Emulsifiable7512%12Cast Iron
Steel
Cast Aluminum
Wrought Aluminum
General purpose machining & grinding
MICROCUT®
19 GM
Emulsifiable7515%17Non-Ferrous
Steel
Low Machinability Alloys
Heavy-duty machining & grinding
QUAKERCUT®
026 VPE
Straight Oil75100%58Steel
High Ni Alloys
Heavy-duty machining & grinding, tapping, CBN grinding, gun drilling
QUAKERCUT®
010 V ES
Straight Oil75100%64Steel
High Ni Alloys
Heavy-duty machining & grinding, tapping, CBN grinding, gun drilling
METAL PROTECTING
FERROCOTE®
26V LD
Oil50100%26Ferrous
Non-Ferrous
Light-duty corrosion preventive
(3-6 months)
FERROCOTE®
30V MD
Oil50100%30Ferrous
Non-Ferrous
Medium-duty corrosion preventive
(6-12 months)
FERROCOTE®
61A-US
Oil50100%49Ferrous
Non-Ferrous
Medium-duty corrosion preventive
(6-12 months)
FERROCOTE® 6130Oil50100%6Ferrous
Non-Ferrous
Medium-duty corrosion preventive
(6-12 months)
METAL FORMING
QUAKERDRAW®
58 BF
Emulsifiable7580%71Aluminum
Copper
Steel
Zinc
Severe, high speed punching and/or forming operations
QUAKERDRAW®
CH 1000
Synthetic75100%4Regular and
Alloy-coated Tooling
High performance cold forging and heading